Product Detail

Installation Details
DRMFA.gif (2115 bytes) Cross Section
DRMFB.gif (3976 bytes)
Usage

Fry Reglet "F" Reveal Molding is used to form wall trim reveal where drywall terminates against sill, jamb, ceiling or other finish material in the same plane. Supports ceiling material.

Guide Specification

Where indicated on drawings, Fry Reglet "F" Reveal Molding, as manufactured by Fry Reglet Corporation, shall be installed. Aluminum shall be extruded alloy 6063 T5, with chemical conversion coating, unless otherwise specified.

Perspective
DRMFC.gif (11006 bytes)
"F" Reveal Molding Sizes
Dim. A
Reveal
Depth
Dim. B
Reveal
Width
Number
Non-Vented Vented
1/2" 1/8" DRMF-50-125 ­
1/2" 1/4" DRMF-50-25 ­
1/2" 3/8" DRMF-50-375 ­
1/2" 1/2" DRMF-50-50* DRMF-50-V-50
1/2" 5/8" DRMF-50-625 DRMF-50-V-625
1/2" 3/4" DRMF-50-75** DRMF-50-V-75
1/2" 1" DRMF-50-100 DRMF-50-V-100
5/8" 1/2" DRMF-625-50* DRMF-625-V-50
5/8" 5/8" DRMF-625-625 DRMF-625-V-625
5/8" 3/4" DRMF-625-75** DRMF-625-V-75
5/8" 1" DRMF-625-100 DRMF-625-V-100
5/8" 3" DRMF-625-300 DRMF-625-V-300
*Accepts 3/8" snap-in components
**Accepts 5/8" snap-in components